Commercial 3D Printing Services for master production

Highest quality guaranteed

Lion Tower Miniatures are able to help you get your miniatures range off the ground with the highest quality 3D printed masters.

If your sculpt isn’t viable or requires additional work this will be advised including exactly how and where fixes are required.  We will also highlight to you any areas that are likely to cause problems further on in the production process, such as thin areas or trapping points that will reduce the life of your moulds and ultimately cost you more money in the long run.

Once you have your digitally sculpted miniature completed and prepared as an STL file, simply send the files to dan@ltminis.com via www.wetransfer.com to get a printing quote.

Please note that the masters produced will carry the highest level of detail and can be moulded for resin production with no issues.  If you wish to have your models produced in metal, we would recommend mastering in resin first as although the 3D prints can be vulcanised, the prints will not survive the process so you will only get one chance to get an impression.

Also note that these models are intended as masters to be produced, and should you choose to game with these prints directly they are strong, but not as resilient as resin or metal, and so we would always recommend getting your prints moulded and cast, and can recommend some good service providers if needed.

All of our miniature range is digitally sculpted and has been 3D printed in-house so if you check out our range if you have any concerns about the commercial viability of the prints.  

3D Printing Example prices

This Miniature is the ranger from the Lion Tower Miniatures RPG Range 32mm scale from the foot to the eyes, and is stood on a 30mm diameter base.  

Approximate cost to print this miniature is £90.60 (including file preparation, support removal and finishing) 

This Miniature is the sorcerer from the Lion Tower Miniatures RPG Range 32mm scale from the foot to the eyes, and is stood on a 30mm diameter base.  

Approximate cost to print this miniature is £86.86 (including file preparation, support removal and finishing) 

This Miniature is the Barbarian from the Lion Tower Miniatures RPG Range, 32mm scale (although this one is slightly larger and more imposing at 34mm tall to the eyes), and is stood on a 30mm diameter base.  

Approximate cost to print this miniature is £96.74 (including file preparation, support removal and finishing) 

This Miniature is the Norndrassel Snow Troll from the Wrathborn Range.  A 32mm scale miniature that stands 120mm tall to the top of the club and is stood on a 90mm diameter base.  

Approximate cost to print this miniature is £419.52 (including file preparation, support removal and finishing) 

Note it may be possible to reduce the print cost of this model by hollowing out the body, but this was printed as fully solid object and is reflected in the price.

Send us your STL Files to dan@ltminis.com for a quote

3D Printing Inquiries

2 + 6 =

Free Shipping when you spend over: UK - £75, Rest of the World £150 Dismiss

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Join our mailing list to receive the latest news and updates from our team.

You have Successfully Subscribed!

Pin It on Pinterest

Share This
0